Suburban 1/2 Ton 4WD V8-5.3L VIN Z Flex Fuel (2006)
13. If equipped with a 8.1L engine, perform the following:
Important:
^
Ensure the oil cooler line being installed has a plastic cap on the end that connects to the quick connect fitting. If no plastic cap exists, or the
plastic cap is damaged, obtain a new cap. Install the cap onto the cooler line prior cooler line installation.
^
Do not use the plastic cap in order to install the cooler line into the fitting.
14. Install the oil cooler hoses to the clip.
15. If equipped with a 5.3L or 6.0L engine, perform the following:
1. Install the oil cooler hoses to the hose clip on the fan shroud.
2. Snap the oil cooler hose clip shut.
Important:
^
Ensure the oil cooler line being installed has a plastic cap on the end that connects to the quick connect fitting. If no plastic cap exists, or the
plastic cap is damaged, obtain a new cap. Install the cap onto the cooler line prior cooler line installation.
^
Do not use the plastic cap in order to install the cooler line into the fitting.
16. Install the oil cooler lines to the radiator.
