Suburban 1/2 Ton 4WD V8-5.3L VIN Z Flex Fuel (2006)
Notice: Refer to Fastener Notice in Service Precautions.
2. Install the exhaust heat shield nuts.
Tighten the nuts to 9 Nm (80 inch lbs.).
3. Install the exhaust front heat shield to the studs.
4. Install the exhaust front heat shield nuts.
Tighten the nuts to 9 Nm (80 inch lbs.).
5. Install the catalytic converter, if necessary.
6. Install the exhaust manifold pipe, if necessary.
