chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

ABOUT US
Heater Hose - Inlet (XLT)|Page 14413 > < Heater Hose - Inlet (XLT)|Page 14411

Suburban 1/2 Ton 4WD V8-5.3L VIN Z Flex Fuel (2006)

Page 2
background image

7. Remove the inlet heater hose.

INSTALLATION PROCEDURE

1. Install the inlet heater hose.

2. Install the inlet heater hose to the water pump.

3. Connect the heater hose to the heater core.

IMPORTANT:  Firmly push the quick connect onto the heater core pipe until you hear an audible click.

4. Install the heater and surge tank hoses to the mounting clip.

Heater Hose - Inlet (XLT)|Page 14413 > < Heater Hose - Inlet (XLT)|Page 14411