Suburban 1/2 Ton 4WD V8-5.3L VIN Z Flex Fuel (2006)
Notice: Refer to Fastener Notice in Cautions and Notices.
4. Install the lower control arm retaining nuts.
^
Tighten the nuts to 175 Nm (129 ft. lbs.).
5. Connect lower ball joint stud to the steering knuckle.
6. Install the wheel drive shaft.
7. Install the nut to the lower ball joint stud.
^
Tighten the nut to 100 Nm (74 ft. lbs.).
8. Install the torsion bars.
9. Install the shock absorber lower nut and bolt.
10. Install the stabilizer shaft links to the lower control arm.
11. Install the tire and wheel.
12. Remove the safety stands.
13. Lower the vehicle.
14. Align the vehicle.
