Suburban 1/2 Ton 4WD V8-5.3L VIN Z Flex Fuel (2006)
Speed Sensor: Service and Repair
NVG 246-NP8 Transfer Case
Transfer Case Speed Sensor Replacement - Front
Transfer Case Speed Sensor Replacement - Front
Removal Procedure
1. Remove the transfer case shield, if equipped.
2. Disconnect the front speed sensor electrical connector (5).
3. Remove the front speed sensor.
Installation Procedure
1. Notice: Refer to Fastener Notice in Service Precautions.
Install the front speed sensor.
^
Tighten the speed sensor to 15 Nm (11 ft. lbs.).
