chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

Instruments - Rear Vision Camera Inoperative|Page 18013 > < Instruments - Rear Vision Camera Inoperative|Page 18007
Page 1
background image

Rear Vision Camera: All Technical Service Bulletins
Instruments - Rear Vision Camera Inoperative

Bulletin No.: 06-08-127-002

Date: November 09, 2006

TECHNICAL

Subject:
UVC Rear Vision Camera System Inoperative (Inspect for Missing CPA Retainer and/or Properly Seated Connector/Connection at Camera)

Models:
2007 Cadillac Escalade, Escalade ESV, Escalade EXT
2007 Chevrolet Avalanche, Suburban, Tahoe
2007 GMC Yukon, Yukon XL, Yukon Denali, Yukon Denali XL

with Rear View Camera (RPO UVC)

Condition

Some customers may comment on a condition with the rear vision camera having a blank screen when shifting into reverse. You will also notice a
disclaimer at the top of the screen but the rest of the screen is black.

Cause

A connector position assurance (CPA) retainer may be missing from the connector at the camera connector.

Correction

Examine the connection at the rear view camera wiring harness connector. Inspect for bent / backed out pins or a missing CPA retainer in the rear view
camera connector. Repair or replace as necessary. Refer to Object Detection Connector End Views, Connector 9 Rearview Camera (UVC) in SI.

Inspect for a missing CPA retainer by performing the following steps:

Refer to Safety and Security - Object Detection - Rear Camera Replacement Liftgate or Endgate in SI.

Depending on the model of the vehicle, remove one of the following components:

Endgate Trim Panel 

Rear Liftgate Applique

Instruments - Rear Vision Camera Inoperative|Page 18013 > < Instruments - Rear Vision Camera Inoperative|Page 18007