Suburban 2WD V8-6.0L (2007)
Notice: Refer to Fastener Notice .
1. Install the cargo box stowage box (2) to the vehicle.
Tighten the bolts to 9 N.m (80 lb in).
2. Install the cargo tie-down rings and bolts to the body side inner panel.
Tighten the bolts to 9 N.m (80 lb in).
3. Install the cargo box stowage lid assembly. Refer to Cargo Box Stowage Box Lid Replacement .
4. Install the lamp socket to the pickup box side courtesy lamp assembly.
5. Install the assist handle. Refer to Endgate Assist Handle Replacement (Avalanche) .
6. Install the rear compartment cover assembly. Refer to Cargo Box Front Cover, Center Cover, and Rear Cover Replacement .
