Suburban 2WD V8-6.0L (2007)
Caution: Do not depress the brake pedal with the brake rotors/calipers and/or the brake drums removed. Damage to the brake system
may result. If brake system damage occurs and is not repaired, vehicle damage and/or personal injury or death may result.
10. Remove the brake caliper guide pin bolts from the brake caliper.
11. Remove the brake caliper from the caliper mounting bracket.
Installation Procedure
1. Install the brake caliper to the caliper mounting bracket.
Notice: Refer to Fastener Notice.
2. Install brake caliper guide pin bolts.
Tighten the bolts to 108 N.m (80 lb ft).
3. Remove the cap or plug from the brake hose to caliper fitting.
Important: Install 2 NEW copper brake hose gaskets.
4. Assemble the 2 copper brake hose gaskets to the brake to caliper bolt and the brake hose.
5. Install the brake hose to caliper bolt.
Tighten the bolts to 45 N.m (33 lb ft).
6. Bleed the brake system. Refer to Hydraulic Brake System Bleeding.
