Suburban 2WD V8-6.0L (2007)
1. Install the EVAP lines to the fuel tank.
2. Connect the EVAP line quick connect fittings to the fuel tank module.
3. Install the EVAP lines to the clip (3).
4. Install the EVAP line to the clip (2) and close the clip.
5. Install the EVAP line to the clip (1) on the fuel tank.
6. Install the rear fuel tank.
Evaporative Emission (EVAP) Hoses/Pipes Replacement - Chassis (1500 Series)
EVAPORATIVE EMISSION HOSES/PIPES REPLACEMENT - CHASSIS (1500 SERIES)
REMOVAL PROCEDURE
IMPORTANT: Clean all fuel and evaporative emission (EVAP) lines connections and surrounding areas prior to disconnecting the lines in order to
avoid possible fuel and/or EVAP system contamination.
