chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

ABOUT US
Crankshaft Position Sensor > < Camshaft Position Sensor Replacement (With RPO Codes LY2/LC9/LY5/LMG)|Page 11063

Suburban 2WD V8-6.0L (2007)

Page 3
background image

5. Install the CMP sensor wire harness (737).
6. Connect the CMP sensor wire harness electrical connectors to the CMP sensor and the CMP actuator magnet.

7. NOTE:  Refer to Fastener Notice.

Install the 3 CMP sensor wire harness bolts (738).

Tighten the bolts to 12 N.m (106 lb in).

8. Connect the engine wiring harness electrical connector (1) to the CMP sensor wire harness.
9. Lower the vehicle.

Crankshaft Position Sensor > < Camshaft Position Sensor Replacement (With RPO Codes LY2/LC9/LY5/LMG)|Page 11063