Suburban 2WD V8-6.0L (2007)
Starter Cable: Service and Repair
STARTER SOLENOID CABLE REPLACEMENT
REMOVAL PROCEDURE
1. Disconnect the negative battery cable.
2. Remove the air cleaner outlet duct.
3. Remove the mega fuse cover.
4. Remove the starter solenoid cable nut (1) from the mega fuse stud.
5. Remove the starter solenoid cable terminal (2) from the mega fuse stud.
6. Open the starter solenoid cable cover at the positive battery terminal.
7. Loosen the starter solenoid cable nut (5).
8. Remove the starter solenoid cable from the positive battery terminal.
9. Remove the starter solenoid cable clip (4) from the air conditioning (A/C) evaporator tube.