Suburban 2WD V8-6.0L (2007)
Upper Control Arm Replacement (2500 Series)
Upper Control Arm Replacement (2500 Series)
Tools Required
J-42188-B Ball Joint Separator
Removal Procedure
1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle.
2. Remove the tire and wheel.
3. Remove the retaining bolt for the brake hose and the wheel speed sensor brackets.
4. Remove the nut at the upper ball joint. Discard the nut.
5. Disconnect the upper control arm from the steering knuckle using the J-42188-B.
