Suburban 2WD V8-6.0L (2007)
5. Tighten the right exhaust pipe nuts.
Tighten the nuts to 50 N.m (37 lb ft).
6. Tighten the left exhaust pipe nuts.
Tighten the nuts to 50 N.m (37 lb ft).
7. Install the transmission crossmember.
8. Remove the support from the transmission.
9. Lower the vehicle.
10. Install the transmission oil level indicator.
11. Lock the transmission oil level indicator.
12. Install the intake manifold.
Manual Shift Shaft and Seal Replacement
Manual Shift Shaft and Seal Replacement