Suburban 3/4 Ton 4WD V8-393 6.5L DSL Turbo (1993)
Figure 3-End Gate Window Striker and Hinge
REMOVE OR DISCONNECT (Figure 3)
Open the end gate window.
1.
Striker to the end gate window pin.
2.
Striker to the end gate window bolt.
3.
Striker from the end gate window.
INSTALL OR CONNECT (Figure 3)
NOTICE:
For steps 2 and 3, refer to "Notice" on page lOA5-1.
1.
Striker to the end gate window.
2.
Striker to the gate window bolt.
TIGHTEN
Striker to the end gate window bolt to 10 N.m (89 lbs. in.).
3.
Striker to the end gate window pin.
TIGHTEN
Striker to the end gate window pin to 1 0 N.m (89 lbs. in.).
End Gate Window Hinge Replacement
REMOVE OR DISCONNECT (Figure 3)
1.
End gate window supports. Refer to "End Gate Window Support Replacement."