Suburban 3/4 Ton 4WD V8-393 6.5L DSL Turbo (1993)
1. Hex nut using a 19 mm socket.
Removing The Clutch Plate
2. Clutch front plate using J 37825.
-
Align the puller center bolt to the compressor shaft.
-
Thumb tighten the three puller bolts into the threaded holes.
-
Turn the center bolt to the right with the socket wrench until the front plate is loosened.
Removing The Shaft Key
3. Shaft key (27) by lightly tapping it loose with a slot screw driver and hammer.
Removing The Internal Snap Ring
4. Internal bearing snap ring (4) with J 4245.
5. External front housing snap ring with J 6435.
6. Rotor pulley assembly.
