Suburban 3/4 Ton 4WD V8-6.0L VIN U (2004)
9. Connect the inside door lock rod to the handle retainer clip.
10. Install the water deflector.
11. Install the door trim panel.
12. Inspect the operation of all the related components.
Lock Actuator Replacement - Rear Door
LOCK ACTUATOR REPLACEMENT - REAR DOOR
REMOVAL PROCEDURE
1. Raise the window.
2. Remove the door trim panel.
3. Remove the water deflector.
4. Disconnect the inside door lock rod from the handle retainer clip.
5. Disconnect the manual door lock rod from the door retainer clips.
