Suburban 3/4 Ton 4WD V8-6.0L VIN U (2004)
2.2.
Tighten the bolts a final pass to 30 Nm (22 ft. lbs.).
3. Install the heater inlet hose to the water pump.
4. Position the heater inlet hose clamp at the water pump.
5. Install the surge tank outlet hose to the water pump.
6. Position the surge tank outlet hose clamp at the water pump.
7. Install the outlet hose to the water pump.
8. Position the outlet hose clamp at the water pump.
9. Install the accessory drive belt.