Suburban 3/4 Ton 4WD V8-6.0L VIN U (2004)
10. Install the spacer plate support and the spacer plate support bolts.
^
Tighten the bolts to 11 Nm (97 inch lbs.).
11. After installing the spacer plate support (2), look through the hole in the spacer plate to ensure that the checkball (1) has remained in the proper
location.
12. Install a new 1-2 accumulator piston seal (1) to the 1-2 accumulator piston.
13. Install the 1-2 accumulator inner and outer springs to the 1-2 accumulator cover.
14. Install the 1-2 accumulator piston onto the pin in the 1-2 accumulator cover.
Ensure that the piston legs face the accumulator cover.
