Suburban 4WD V8-5.3L (2008)
Adhesives, and Lubricants (See: Specifications/Fluid Type Specifications/Front Drive Axle) .
Notice: Refer to Fastener Notice .
2. Install the actuator (1 or 3).
Tighten the actuator to 20 N.m (15 lb ft).
3. Connect the electrical connector to the actuator.
4. Install the front differential carrier shield, if equipped. Refer to Shield Replacement (See: Service and Repair/Removal and Replacement/Front
Drive Axle/Shield Replacement) .
5. Lower the vehicle.
