Suburban 4WD V8-6.0L (2007)
Notice: Support the brake caliper with heavy mechanic wire, or equivalent, whenever it is separated from its mount and the hydraulic flexible
brake hose is still connected. Failure to support the caliper in this manner will cause the flexible brake hose to bear the weight of the caliper, which
may cause damage to the brake hose and in turn may cause a brake fluid leak.
7. Remove the brake caliper guide pin bolts.
8. Remove the caliper from the caliper bracket and support with heavy mechanics wire or equivalent.
9. Remove the brake pads from the caliper bracket.
Important: Do not reuse the brake pad retaining springs.
10. Remove and discard the brake pad retaining springs.
11. Inspect the brake caliper. Refer to Brake Caliper Inspection.
Installation Procedure
1. Install NEW brake pad retaining springs to the caliper bracket.
2. Install the brake pads to the caliper bracket.
