Suburban 4WD V8-6.0L (2007)
Oil Pick Up/Strainer: Service and Repair
Oil Pump, Screen, and Crankshaft Oil Deflector Replacement (RPOs LY6/L76/L92)
Removal Procedure
1. Remove the oil pan.
2. Remove the engine front cover.
3. Remove the oil pump screen bolt and nuts.
4. Remove the oil pump screen with O-ring seal.
5. Remove the O-ring seal from the pump screen.
6. Discard the O-ring seal.
7. Remove the remaining crankshaft oil deflector nuts.
8. Remove the crankshaft oil deflector.