Suburban 4WD V8-6.0L (2007)
Valve Guide Seal: Service and Repair
Valve Stem Oil Seal and Valve Spring Replacement
Tools Required
^
J 22794 Spark Plug Port Adapter
^
J 38606 Valve Spring Compressor
Removal Procedure
1. Remove the rocker arm. Refer to Valve Rocker Arm and Push Rod Replacement.
2. Disconnect the spark plug wire at the spark plug.
^
Twist each plug wire boot 1/2 turn.
^
Pull only on the boot in order to remove the wire from the spark plug.
Important: Remove the spark plugs from the cylinder head with the engine at room temperature.
3. Loosen the spark plug 1 or 2 turns.
