Suburban 4WD V8-6.0L (2007)
13. Remove the CMP sensor (703).
14. Remove the CMP actuator magnet bolts (751), and magnet (752).
15. Remove and discard the CMP actuator magnet gasket (753).
Installation Procedure
Important:
^
Do not reuse the crankshaft oil seal or front cover gasket.
^
Do not apply any type of sealant to the front cover gasket, unless specified.
^
The special tool in this procedure is used to properly center the front crankshaft front oil seal.
-
All gasket surfaces should be free of oil or other foreign material during assembly.
