Suburban 4WD V8-6.0L (2007)
6. Install the evaporator tube nut to the evaporator.
Tighten the nut to 16 N.m (12 lb ft).
7. Install the surge tank hold down nut and bolt and position aside.
8. Install the air cleaner assembly.
9. Install the upper radiator air baffle and deflector.
10. Evacuate and recharge the system. Refer to Refrigerant Recovery and Recharging. See: Service and Repair/Procedures/Refrigerant Recovery and
Recharging
11. Leak test the fittings of the components using the J 39400-A.
Suction Hose Replacement (With RPO Code C69)
SUCTION HOSE REPLACEMENT (WITH RPO CODE C69)