Suburban 4WD V8-6.0L (2007)
3. Connect the HO2S electrical connector (7) to the engine wiring harness electrical connector (1).
4. Install the CPA retainer (2).
5. Install the HO2S clip (8) to the engine wiring harness.
6. Lower the vehicle.
3. Connect the HO2S electrical connector (7) to the engine wiring harness electrical connector (1).
4. Install the CPA retainer (2).
5. Install the HO2S clip (8) to the engine wiring harness.
6. Lower the vehicle.