Suburban 4WD V8-6.0L (2007)
Control Arm: Service and Repair
Rear Suspension
Rear Axle Upper Control Arm Replacement
Rear Axle Upper Control Arm Replacement
Removal Procedure
1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle.
2. Disconnect the electronic suspension control (ESC) sensor, if equipped.
3. Remove the upper control arm retaining nut and bolt from the frame bracket.
4. Remove the upper control arm retaining nut and bolt from the axle bracket.
5. Remove the upper control arm.
Installation Procedure
1. Install the upper control arm.
2. Install the upper control arm retaining bolt and nut to the axle bracket.
