chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

ABOUT US
Axle Shaft Assembly > < Rear Axle Shaft Seal and/or Bearing Replacement (8.6, 9.5 LD Axles)|Page 12801

Suburban 4WD V8-6.0L (2007)

Page 2
background image

4. Drive the tool into the bore until the axle shaft seal bottoms flush with the tube.
5. Install the axle shaft. 
6. Install the rear axle housing cover. 
7. Install the tire and wheel assembly. 
8. Fill the rear axle. Refer to Rear Axle Lubricant Replacement.
9. Lower the vehicle.

Axle Shaft Assembly > < Rear Axle Shaft Seal and/or Bearing Replacement (8.6, 9.5 LD Axles)|Page 12801