Tahoe 2WD V8-4.8L VIN V (2004)
3. Install the seat belt cover.
4. Install the rear door sill trim plate.
Trim Replacement - Third Pillar (Tahoe/Yukon/Escalade/Suburban)
Trim Replacement - Third Pillar (Tahoe/Yukon/Escalade/Suburban)
Removal Procedure
1. Remove the rear door sill trim plate.
2. Remove the lower rear seat belt cover and bolt.
3. Remove the trim panel from the vehicle.
Installation Procedure
1. Install the body side lower trim panel to the vehicle.
Notice: Refer to Fastener Notice in Service Precautions.
2. Install the lower seat belt bolt.
Tighten the bolt to 70 N.m (52 lb ft).
3. Install the seat belt cover.
4. Install the rear door sill trim plate.
