Tahoe 2WD V8-4.8L VIN V (2004)
1. Install the door module into the switch panel bezel until it snaps into place.
2. Install the switch panel bezel and module into the door trim panel.
Notice: Refer to Fastener Notice in Service Precautions.
3. Install the screw (2) that retains the switch panel bezel (1) to the front door trim panel.
Tighten the screw (2) to 2 N.m (18 lb in).
4. Install the front door trim panel.
5. Perform the programming procedure for the Tire Pressure Monitoring system. Refer to Control Module Setup in Tire Pressure Monitoring. See:
Instrument Panel, Gauges and Warning Indicators/Tire Monitoring System/Service and Repair/Removal and Replacement
6. Perform the programming procedure for the Keyless Entry system. Refer to Transmitter Programming in Keyless Entry. See: Keyless
Entry/Keyless Entry Transmitter/Service and Repair
7. If equipped with camper mirrors program the door module. Refer to Service Programming System (SPS) in Programming. See: Testing and
Inspection/Programming and Relearning
