Tahoe 2WD V8-4.8L VIN V (2004)
1. Push the cable into the hole in the head restraint release mechanism.
2. Ensure the retainer tabs fully extend to secure the cable to the head restraint mechanism.
3. Clip the cable end onto the head restraint mechanism.
4. Push the cable end into the hole in the seat back latch.
5. Ensure the retainer tabs fully extend to secure the cable to the seat back latch.
6. Clip the cable end onto the seat back latch.
7. Install the seat back cover and pad.
Head Restraint Replacement (Folding)
Head Restraint Replacement (Folding)
The folding headrest cannot be replaced separately. Therefore if the folding mechanism has failed, the seat back frame needs to be replaced. Refer to
Seat Back Frame Replacement - Rear (60/40 Split - 50/50 Split) Seat Back Frame Replacement - Rear (Bench).
Head Restraint Replacement (Non-Cadillac)
Head Restraint Replacement (Non-Cadillac)
Removal Procedure