Tahoe 2WD V8-4.8L VIN V (2004)
Seat Cushion: Removal and Replacement
Seat Cushion Frame Replacement - Front
Seat Cushion Frame Replacement - Front
Removal Procedure
1. Remove the seat trim panel.
2. Remove the seat cushion trim cover and pad.
3. Remove the following components from the seat cushion frame:
*
The frame springs (1)
*
The frame suspension (2)
*
The plastic retainers (3)
4. Remove the seat cushion frame from the vehicle.
Installation Procedure
1. Install the following components to the seat cushion frame:
*
The plastic retainers (3)
*
The frame suspension (2)
*
The frame springs (1)
2. Install the seat cushion trim cover and pad.
3. Install the seat trim panel.
4. Re-zero the inflatable restraint passenger presence system. Refer to Passenger Presence System Rezeroing Procedure in Restraint Systems. See:
Restraint Systems/Air Bag Systems/Testing and Inspection/Diagnostic Trouble Code Tests and Associated Procedures/Related Tests and
Procedures/Passenger Presence System Rezeroing Procedure
Seat Cushion Frame Replacement - Rear (Bench)
Seat Cushion Frame Replacement - Rear (Bench)
Removal Procedure
