Tahoe 2WD V8-4.8L VIN V (2004)
4. Remove the brake caliper bracket mounting bolts (2).
5. Remove the brake caliper bracket (1).
6. Remove any contaminants or foreign material from the inside ends of the brake caliper bracket.
7. Clean the mounting surface and threads of the brake caliper bracket.
Installation Procedure
1. Install the brake caliper bracket (1).
2. Perform the following procedure before installing the brake caliper bracket mounting bolts.
^
Remove all traces of the original adhesive patch.
^
Clean the threads of the bolt with denatured alcohol or equivalent and allow to dry.
^
Apply Threadlocker GM P/N 12345493 (Canadian P/N 10953488) to the threads of the bolt.
Notice: Refer to Fastener Notice in Service Precautions.
3. Install the caliper bracket mounting bolts (2).
^
For vehicles equipped with JC5/JH5 brake systems, tighten the caliper bracket mounting bolts to 200 Nm (148 ft. lbs.).
^
For vehicles equipped with JH6 brake systems, tighten the caliper bracket mounting bolts to 165 Nm (122 ft. lbs.).
