Tahoe 2WD V8-4.8L VIN V (2004)
2. Install the booster assembly.
Notice: Refer to Fastener Notice in Service Precautions.
3. Install the 4 booster to bulkhead nuts.
Tighten the nuts to 33 Nm (24 ft. lbs.).
4. Install the stop lamp switch. Refer to Stop Lamp Switch Replacement in Lighting Systems.
5. Install the master cylinder. Refer to Master Cylinder Replacement
6. Connect the return hose, the steering gear, and the inlet hoses.
7. Bleed the hydraulic booster system. Refer to Bleeding the Power Steering System in Power Steering System.
8. Release the park brake and unblock the wheels.
