Tahoe 2WD V8-4.8L VIN V (2004)
3. Install the axle shaft bearing using the J23690 (1) and the J8092 (2).
4. Drive the axle shaft bearing into the axle housing until the tool bottoms against the tube.
5. Install the axle shaft seal using the J21128.
6. Drive the tool into the bore until the axle shaft seal bottoms flush with the tube.
7. Install the axle shaft. Refer to Rear Axle Shaft Replacement (8.6 Inch Axle W/O JL4 9.5 Inch Axle) or Rear Axle Shaft Replacement (8.6 Inch
Axle W/JL4) or Rear Axle Shaft Replacement (9.75 Inch Axle) in Rear Drive Axle.
8. Install the rear axle housing cover. Refer to Rear Axle Housing Cover and Gasket Replacement in Rear Drive Axle.
9. Install the rear wheel speed sensor. Refer to Wheel Speed Sensor Replacement - Rear.
10. Install the tire and wheel assembly. Refer to Tire and Wheel Removal and Installation in Tires and Wheels.
11. Fill the rear axle. Refer to Lubricant Replacement -Rear Drive Axle (8.6 Inch Axle) or Lubricant Replacement - Rear Drive Axle (9.5, 10.5 Inch
Axle) or Lubricant Replacement - Rear Drive Axle (9.75 Inch Axle)in Rear Drive Axle.
12. Lower the vehicle.
