Tahoe 2WD V8-4.8L VIN V (2004)
2. Remove the engine mount-to-engine mount bracket bolts.
3. Raise and suitably support the vehicle. Refer to Vehicle Lifting.
4. Remove the tire and wheel. Refer to Tire and Wheel Removal and Installation in Wheels, Tires and Alignment.
5. Remove the inner wheelhouse panel. Refer- to Refer to Wheelhouse Panel Replacement.
6. Remove the engine protection shield, if equipped. Refer to Engine Protection Shield Replacement.
Important: DO NOT raise and/or support the engine by the crankshaft balancer, or oil pan.
7. Raise and suitably support the engine using adjustable (screw type) jack stands.
8. Remove the engine mount to engine bolts.
9. Remove the right engine mount.
Installation Procedure
