Tahoe 2WD V8-4.8L VIN V (2004)
Oil Pan: Service and Repair
Oil Pan Cover
Oil Pan Cover Replacement
Removal Procedure
1. Drain the engine oil.
2. Remove the oil pan cover bolts (1), cover (2), and gasket (3).
3. Discard the gasket.
Installation Procedure
Notice: Refer to Fastener Notice in Service Precautions.
1. Install a new oil pan cover gasket (3), the cover (2) and bolts (1).
Tighten the bolts to 12 Nm (106 inch lbs.).
2. Refill the engine oil. Refer to Capacities -Approximate Fluid and/or Fluid and Lubricant Recommendations.
