Tahoe 2WD V8-4.8L VIN V (2004)
Notice: Refer to Fastener Notice in Service Precautions.
1. Install the sight shield retainer and the bolts, if required.
Tighten the bolts to 5 Nm (44 inch lbs.).
Notice: Use care when installing the engine sight shield to avoid contacting the manifold absolute pressure (MAP) sensor wire harness connector.
Loss of engine performance or engine damage may result.
2. Install the intake manifold sight shield to the retainer.
Tighten the bolt to 10 Nm (89 inch lbs.).
