Tahoe 2WD V8-4.8L VIN V (2004)
Air Door Actuator / Motor: Service and Repair
HVAC System - Automatic
Air Temperature Actuator Replacement - Auxiliary
AIR TEMPERATURE ACTUATOR REPLACEMENT - AUXILIARY
REMOVAL PROCEDURE
1. Remove the right rear quarter trim panel.
2. Disconnect the electrical connector from the auxiliary air temperature actuator.
3. Remove the retaining screws from the auxiliary air temperature actuator.
4. Remove the auxiliary air temperature actuator (1) from the rear auxiliary HVAC module.
INSTALLATION PROCEDURE
1. Install the auxiliary air temperature actuator (1) to the auxiliary HVAC module.
2. Install the auxiliary air temperature actuator retaining screws.
NOTE: Refer to Fastener Notice in Service Precautions.
Tighten the screws to 1.6 N.m (14 lb in).
3. Connect the electrical connector to the auxiliary air temperature actuator.
4. Install the right rear quarter trim panel.
Air Temperature Actuator Replacement - Left
AIR TEMPERATURE ACTUATOR REPLACEMENT - LEFT
REMOVAL PROCEDURE
1. Remove the I/P insulator panel.
