Tahoe 2WD V8-4.8L VIN V (2004)
7. Remove the evaporator tube nut from the condenser.
8. Disconnect the evaporator tube from the condenser.
9. Remove the insulator retainer bolts and the upper insulator retainers.
10. Remove the condenser from the vehicle.
INSTALLATION PROCEDURE
1. Install the condenser to the vehicle.
IMPORTANT: If replacing the condenser, add the refrigerant oil to the condenser. Refer to Refrigerant System Capacities for system capacity
information.
2. Install the upper insulator retainers and the insulator retainer bolts.
NOTE: Refer to Fastener Notice in Service Precautions.
Tighten the bolts to 2.4 N.m (21 lb in).
