Tahoe 2WD V8-4.8L VIN V (2004)
Throttle Body: Description and Operation
THROTTLE BODY ASSEMBLY
The throttle body assembly consists of the throttle body, the throttle position (TP) sensors, and the throttle actuator motor. The throttle body functions
similar to a similar to a conventional throttle body with the following exceptions:
-
An electric motor opens and closes the throttle valve.
-
The throttle blade is spring loaded in both directions and the default position is slightly open.
-
There are 2 individual TP sensors within the throttle body assembly.
The TP sensors 1 and 2 are potentiometer type sensors, each with the following circuits:
-
A 5-volt reference circuit
-
A low reference circuit
-
A signal circuit
The TP sensors are used to determine the throttle plate angle. The control module provides each TP sensor a 5-volt reference circuit and a low reference
circuit. The TP sensors then provide the control module with signal voltage proportional to throttle plate movement. Both TP sensor signal voltages are
low at closed throttle and increase as the throttle opens.
