Tahoe 2WD V8-4.8L VIN V (2004)
2. Install the pass-through electrical connector to the transmission case.
Notice: Refer to Fastener Notice in Service Precautions.
3. Install the valve body bolts which retain the internal wiring harness and install the TCC solenoid bolts.
^
Tighten the control valve body bolts to 11 Nm (97 inch lbs.).
^
Tighten the TCC solenoid bolts to 11 Nm (97 inch lbs.).
Important: When installing the pressure control solenoid, the electrical connector (2) must be in the position shown.
4. Install the pressure control solenoid (377).
5. Install the pressure control solenoid retainer (378) and retainer bolt (364A).
^
Tighten the bolt to 11 Nm (97 inch lbs.).
