Tahoe 2WD V8-4.8L VIN V (2004)
Important: Do not use a magnet in order to remove the checkballs. Using a magnet to remove the checkballs may magnetize the checkballs,
causing metal particles to stick.
23. Remove the 8 checkballs (9 for some models).
Installation Procedure
1. Install the 8 checkballs (9 for some models) into the transmission case passages.
^
The checkball marked as number 2, is used on RCP, RDP, ZJP and ZLP models only
^
To hold the checkballs in place, use the J 36850.
2. Install the PWM screen into the valve body.
3. Install a new manual 2-1 band servo piston seal (2) onto the manual 2-1 band servo piston (3).
