Tahoe 2WD V8-4.8L VIN V (2004)
1. Install the upper ball joint (1) to the steering knuckle.
Notice: Refer to Fastener Notice in Cautions and Notices.
2. Install the upper ball joint retaining bolts (2) and stud (1).
^
Tighten the bolts to 110 Nm (81 ft. lbs.).
3. Install the nut (1) retaining the upper ball joint to the steering knuckle. Use the J 44664 (2) in order to tighten the joint.
^
Tighten the upper ball joint to the steering knuckle nut to 200 Nm (147 ft. lbs.).
