Tahoe 2WD V8-4.8L VIN V (2004)
1. Install NEW seals onto the servo pistons and the servo cover.
2. Install the 2-4 servo.
3. Install the J29714-A.
4. Tighten the bolt on J 29714-A in order to compress the servo cover.
5. Install the servo cover ring.
6. Remove the J29714-A.
Notice: Refer to Fastener Notice in Service Precautions.
7. Install the oil pan bolt.
^
Tighten the bolt to 11 Nm (97 inch lbs.).