Tahoe 2WD V8-4.8L VIN V (2004)
^
Tighten the bolts alternately and evenly to 11 Nm (97 inch lbs.).
6. If previously removed, install the range selector cable bracket and bolts.
^
Tighten the bolts to 25 Nm (18 ft. lbs.).
7. Apply a small amount of sealant GM P/N 12346004 (Canadian P/N 10953480), or equivalent to the threads of the oil pan drain plug, if equipped.
8. Install the oil pan drain plug, if equipped.
^
Tighten the plug to 18 Nm (13 ft. lbs.).
9. Lower the vehicle.
10. Fill the transmission to the proper level with DEXRON(R)III transmission fluid. Refer to Transmission Fluid Checking Procedure and Fluid
Capacity Specifications.
11. Check the COLD fluid level reading for initial fill only.
12. Inspect the oil pan gasket for leaks.
