Tahoe 2WD V8-5.3L (2007)
Raise the console arm to access the RSA removal tabs.
Using trim removal tool (tool D), press down and rearward to release the RSA removal tabs. The tabs are located on the right and left side of the arm rest
hinge.
Disconnect the 5 J-clip retainers that secure the RSA trim plate by pulling the RSA trim plate away from the console as shown in the illustration.
Replacing the RSA trim plate with a new RSA trim plate is only required for vehicles equipped with the UVA radio system. Vehicles equipped with
UVB radio system proceed to Step 7.
Remove the rear seat audio (RSA) trim plate.
