chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

Relay Module > < Interior - Front/Rear Drink Holder Won't Retain Drinks
Page 2
background image

The four outer tabs will not allow the cup liner to seat properly into the rear cupholder assembly causing a poor fit and a gap.

Carefully cut off the two front outer tabs (1), referring to the graphic above, and cut off the two back outer tabs.

Install the updated rear console cup liner as shown above.

Close the console cupholder assembly.

Parts Information

Warranty Information

For vehicles repaired under warranty, use the table.

Disclaimer

Relay Module > < Interior - Front/Rear Drink Holder Won't Retain Drinks