Tahoe 2WD V8-5.3L (2007)
Notice: Refer to Fastener Notice.
1. Position the rear floor panel exhaust heat shield to the studs and install the heat shield nuts.
Tighten the nuts to 9 N.m (80 lb in).
2. If the vehicle is a Suburban, Yukon XL, Yukon Denali XL, Escalade ESV, Escalade EXT or a Avalanche, position the exhaust heat shield to the
studs and install the heat shield nuts, as required.
Tighten the nuts to 9 N.m (80 lb in).