Tahoe 2WD V8-5.3L (2007)
2. Connect the EVAP line quick connect fittings at the fuel tank module and vent valves.
3. Install the EVAP lines to the fuel tank clips (1, 3, 4, and 5) and close the clips.
4. Install the EVAP lines to the fuel tank clips (2, and 6).
5. Install the fuel tank shields (1, and 4) and retainers (2, and 3).
6. Install the fuel tank.
Evaporative Emission (EVAP) Hoses/Pipes Replacement - Canister/Fuel Tank (1500 LWB - 117.3L
(31 Gal) Tank W/E85)
EVAPORATIVE EMISSION HOSES/PIPES REPLACEMENT - CANISTER/FUEL TANK (1500 LWB - 117.3L (31 GAL) TANK W/E85)
REMOVAL PROCEDURE
IMPORTANT: Clean the evaporative emission (EVAP) line connections and surrounding areas prior to disconnecting the fittings in order to avoid
possible EVAP system contamination.
