Tahoe 2WD V8-5.3L (2007)
1. Remove the air cleaner outlet duct.
2. Disconnect the EVAP line quick connect fitting at the intake manifold.
3. Disconnect the EVAP line quick connect fitting at the EVAP canister purge solenoid.
INSTALLATION PROCEDURE
1. Connect the EVAP line quick connect fitting at the EVAP canister purge solenoid.
2. Connect the EVAP line quick connect fitting at the intake manifold.
3. Install the air cleaner outlet duct.
Evaporative Emission (EVAP) Hoses/Pipes Replacement - 2500 LWB - Intermediate
EVAPORATIVE EMISSION SYSTEM HOSES/PIPES REPLACEMENT (2500 LWB - INTERMEDIATE)
REMOVAL PROCEDURE
IMPORTANT: Clean all fuel and evaporative emission (EVAP) line connections and surrounding areas prior to disconnecting the lines in order to
